MacDon R85 Rotary Disc 13 Foot Self-Propelled Windrower Header - Manual (Page 112)

MAINTENANCE AND SERVICING
7.5.1 Maintenance Schedule/Record
Action:  - Check  - Lubricate ▲ - Change
 Hour meter reading
 Service date
 Serviced by
First use Refer to Section 7.5.2 Break-In Inspections, page 106 .
100 hours or annually Refer to Section 7.5.3 Preseason/Annual Service, page 106 .

Conditioner drive belt - see
Inspecting the Conditioner Drive
Belt, page 138
.

Bevel gearbox lube level - see 7.5.7
Lubrication and Servicing Intervals,
page 109
.
End of season Refer to section 7.5.4 End-of-Season Service, page 107 .
10 hours or daily

Hydraulic hoses and lines - see 7.8.1
Hydraulic Hoses and Lines, page
145
.

Cutter blades, deflectors, and discs
- see
7.6.1 Inspecting the Cutterbar
Discs, page 118 .
25 hours

Roll universal shafts- see 7.5.5
Lubrication and Servicing, page 107 .

Cutterbar driveline universals- see
7.5.5 Lubrication and Servicing,
page 107
.
NOTE: A record of daily maintenance is not normally
required, but is at the Owner/Operator’s discretion.
50 HOURS
▲
Cutterbar lube first 50 and 150 hours
- see
7.5.8 Lubricating the Cutterbar,
page 113 .
▲
Bevel gearbox lube level first 50 and
150 hours - see
7.5.7 Lubrication
and Servicing Intervals, page 109 .
169455
104
Rev. E