MacDon R85 Rotary Disc 13 Foot Self-Propelled Windrower Header - Manual (Page 70)

OPERATION
5. Raise lever (A) and undo cinch straps (C).
6. Move hose (B) to store on header.
7. Install caps on connectors and hose end (if equipped).
Figure 5.71
8. At the header, disconnect electrical connector by
turning collar counterclockwise and pulling connector
to disengage.
9. Disconnect drive couplers (A) and (B) and case drain
coupler (C) on header.
Figure 5.72
A - Pressure B - Return
C - Case Drain
10. Move hose bundle from header and locate on
windrower left side (cab forward) with hoses in
support (B).
11. Rotate lever (A) clockwise and push to engage bracket.
12. Locate electrical harness through support (B) and
attach cap to electrical connector (C).
Figure 5.73
169455
62
Rev. E