MacDon R85 Rotary Disc 13 Foot Self-Propelled Windrower Header - Manual (Page 138)

MAINTENANCE AND SERVICING
4. Remove four bolts (A).
5. Remove cover (B) and deflector (C).
Figure 7.39
Installing the Driven Deflector
Follow these steps to replace the driven rotary deflector:
1. Position new deflector (C) on spindle so that it clears
accelerators (D).
2. Install cover (B) and secure with four bolts (A).
3. Tighten bolts.
4. Remove block of wood (if used).
Figure 7.40
Removing the Driveline Deflector
Follow these steps to replace the driveline deflector:
1. Lower the header fully.
2. Shut down the engine and remove the key.
3. Open cutterbar doors. See Section 5.5 Cutterbar
Doors, page 30 .
169455
130
Rev. E