MacDon R85 Rotary Disc 13 Foot Self-Propelled Windrower Header - Manual (Page 37)

OPERATION
5.4.3 Opening the Driveshield: Export Headers
Follow these steps to open the driveshield on export headers:
1. Release rubber latch (A).
2. Insert a screwdriver (or equivalent) through hole (B)
in driveshield and into the notch in latch (C) and
disengage latch.
3. Open driveshield (D).
Figure 5.7
5.4.4 Closing the Driveshield: Export Headers
Follow these steps to close the driveshield on export headers:
1. Lower the shield (A) so that at lower end of driveshield
engage holes in the lower panel and latch (B)
reengages shield.
2. Engage rubber latch (C).
Figure 5.8
169455
29
Rev. E