Retsch Cryomill - Manual (Page 42)

Operating the machine
42
– The auto precooling (ap) LED is lit up.
– “Auto” is shown in the time min display.
Switch automatic precooling off
• Press the button (B10) for at least 2 seconds.
– The auto precooling (ap) LED is extinguished.
– “08:00" is shown in the time min display.
Pos : 6. 39 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Mahldauer ei nst ellen @ 0 \ mod_1226908456965_9. doc @ 3582 @ @ 1
5.10 Setting the grinding time
Pos : 6. 40 /00010 Bedi enungsanleit ung en Kapitels ammlungen/Cr yoMill II /0007 Bedi enung/0015 Cr yoMill II Modul Mahldauer ei nst ellen @ 5 \ mod_1343829251134_9. doc @ 33301 @ @ 1
Fig. 37: Setting the grinding time
• Press the button (B11) to set the grinding time.
The grinding time LED lights up.
• Use the buttons (B9) to set the grinding time
(5 to 30 Hz in 1Hz steps).
– +
Pressing briefly increases the duration.
– -
Pressing briefly shortens the duration.
The display runs more quickly when pressed longer.
NOTICE
In the case of grinding without cooling, the grinding time can be set directly using
the buttons (B9).
Pos : 6. 41 /00005 Ü berschrif ten/ 1. 1 Ü bersc hrift en/ 1. 1 Übersc hrift en BD A/ 11 Dauer der Z wisc henkühlung ei nst ellen @ 0\ mod_1227185184595_9.doc @ 3873 @ @ 1
5.11 Setting the duration of intermediate cooling
Pos : 6. 42 /00010 Bedi enungsanleit ung en Kapitels ammlungen/Cr yoMill II /0007 Bedi enung/0006 Cr yoMill II Modul Dauer der Z wisc hen kühlung ei nst ellen @ 5\ mod_1343829237941_9.doc @ 33202 @ @ 1
Fig. 38: Setting the intermediate cooling
B12 B9
LED
B11 B9
LED