RKI Instruments GX-94 - Manual (Page 22)

Page 21 GX-94 Operator’s Manual
DISPLAY MODE
The GX-94 has four operating modes: normal operation, display mode,
setup mode, and calibration mode. With the GX-94 in display mode, you
can:
• display, enter, or update user and station ID’s
• display peak readings
• display average readings
• display time in operation
• display STEL and TWA readings (H
2
S and CO only)
• display battery voltage
• display date, time, and temperature
• clear the data logging memory
• display remaining log time
To enter display mode, from the normal operation screen press the DIS-
PLAY/(ADJ.) button. To scroll from one screen to the next, press the
DISPLAY/(ADJ.) button. The screen will hold for 20 seconds before
reverting to normal operation screen, or until DISPLAY/(ADJ.) is
pressed to go to the next screen.
User and Station ID Screen
This function appears only when the user ID option is activated in setup
mode (see Setting the ID Function in the setup mode section). Use
this screen to view, enter, or update the User ID and Station ID. The
User ID and Station ID information is part of the logged data, providing
a way to identify the user and location of exposure.