RKI Instruments RX-517 - Manual (Page 21)

PT0E-0730
20
５−１−１．Alarm setting
1 st alarm display
PEAK key
M ‐ P A S S W O R D
・First, 1 st alarm point shall be shown on the
display.
・Change 『＋』or『−』key and confirm it by
pressing ENTER key.
・When press ESC key, the setting shall be void
and first alarm point shall be shown.
HC：1 st alarm point
HC：2 nd alarm point
OXY：1 st alarm point
OXY：2 nd alarm point
H
2
S：1 st alarm point
H
2
S：2 nd alarm point
High H
2
S：1 st alarm point（RX-517）
High H
2
S：2 nd alarm point（RX-517）
Adjust it
in this
procedure.
ENTER key
ESC key
ENTER key
ENTER key
SAVE?
END
W A R N I N G
ESC key
ESC key
ESC key
ESC key
ESC key
・ After finishing 2 nd alarm of H
2
S is
adjusted, it displayed “SAVE ?”.
W A R N I N G
W A R N I N G
A L A R M
・Input the password【3002】.
・When press『＋』or『−』, the number will be
changed.
・Fix the number by ENTER key and move to next
digit.
・After fixing the last digit, move to alarm
setting (When make the password error, it will
show “ERROR”. Press ESC key.)
・Then 2 nd alarm point of CH4 shall be shown on
the display.
・When change by『＋』or『−』key, confirm it
by ENTER key.
・When press the setting by ESC key, go back to
1 st alarm point.
・When press “ENTER” key, save the set value
and shall show “END” display and go back
to 1 st alarm point display.
・When press “ESC” key, the set value is
canceled and go back to 1 st alarm point
display.