RKI Instruments SM-2009U - Manual (Page 13)

Control Panel • 9
Control Panel
The control panel is used to setup and operate the calibration station. It is
located at the front of the calibration station. It includes the control
buttons, the control button LEDs, and the CHARGE status LED.
Five control buttons are located on the control panel. From left to right
they are BUMP
▼ , CAL. ▲ , EDIT ENTER, COPY, and POWER. The
BUMP ▼ , CAL. ▲ , and COPY control buttons each have an LED above
them that indicates the status of the function controlled by that button.
The CHARGE LED is located above the POWER button and functions as
a pilot LED, a system failure LED, and a charge indication LED.
1SEC ON
3SEC OFF
POWER
GX-2009 OFF
COPY
CAL. BUMP
BUMP LED
CHARGE LED
COPY LED
CHARGE
DATA CLEAR
EDIT
ENTER
Control Buttons
CAL. LED
Figure 5: Control Panel