RKI Instruments SM-2009U - Manual (Page 5)

Overview • 1
Chapter 1: Introduction
Overview
This chapter briefly describes the SM-2009U Single Module Calibration
Station and the Single Module Data View Software. This chapter also
describes the SM-2009U Single Module Calibration Station Operator’s
Manual (this document). Table 1 at the end of this chapter lists the
SM-2009U’s specifications.
About the SM-2009U
The SM-2009U Single Module Calibration Station is an advanced,
reliable system that provides charging, calibration, bump testing, and
calibration and bump test records for the GX-2009 gas detector. It is
designed to save the records to a USB flash drive. The Single Module
Data Viewer Software can then be used with a Windows-based personal
computer to retrieve calibration and bump test data files from the USB
flash drive or from the computer’s hard drive if the files have been
transferred to the hard drive from the flash drive.
The purpose of this manual is to explain how to set up and use the SM-
2009U and the Single Module Data Viewer Software. You will learn how
to:
• install and launch the software
• prepare the SM-2009U for use
• perform a bump test
• perform a calibration
• save calibration and bump test records to a USB flash drive
• view, print, and export calibration and bump test records
• use the SM-2009U to charge a GX-2009