RKI Instruments GX-2009 - Manual (Page 19)

Read Commands • 19
configuration to a file and changing the instruments parameter
configuration. The three basic command sets for performing
these operations are the Read Commands, Write Commands,
and Setting Commands. These command sets are described in
the sections that follow.
Read Commands
Use the Read Commands to retrieve parameter configuration
information from a GX-2009 so the program knows which
instrument is connected to it and to save several of the
instrument’s parameter settings and most recent calibration
information to a .csv (comma separated value) file. The two
Read Commands are Instrument Information and Information
Get & Save.
Figure 12: Read Commands, Blanked Out