RKI Instruments GX-2009 - Manual (Page 27)

Write Commands • 27
sections in this manual.
Date/Time Set
Use Date/Time Set to update the date and time in a connected
instrument to match the computer’s date and time. Follow these
steps to update an instrument’s date and time:
1. Launch the GX-2009 User Setup Program as described in
“Launching the Program” on page 14.
2. Connect the GX-2009 to the User Setup Program as
described in “Connecting a GX-2009 to the User Setup
Program” on page 15.
NOTE: It is not necessary to use Instrument Information or
Instrument Get & Save in order to update the date and
time. Although it is not necessary to use Instrument
Information or Instrument Get & Save before
updating the instrument’s date and time, you can update
the date and time after using either of these commands
if desired.
3. Click Date/Time Set. The following window will appear.
4. Click Yes. The program will update the instrument’s date and
time to match the computer’s, then display the following
Figure 21: Update Window