RKI Instruments GX-2009 User Manual
Page 35
Write Commands • 35
message in the Adjustment Window for that channel will
indicate that the span adjustment failed. Click OK to return to
the Calibration Window. See the GX-2009 Operator’s
Manual for trouble shooting suggestions.
14.Turn the regulator on/off knob clockwise to close it.
15.Hold the GX-2009 in place with one hand while removing the
adapter plate from the GX-2009’s sensor face with the other
to avoid moving the GX-2009 excessively and losing the
connection to the computer
16.Remove the regulator from the calibration gas cylinder.
17.Leave the regulator connected to the calibration adapter
plate for convenience.
18.Store the components of the calibration kit in a safe and
convenient place.
19.Click Exit Calibration. The program will return to the Main
Window.