SATEC ETC2002 - Manual (Page 21)

Chapter 4 Connecting to the ETC2002 Using HyperTerminal
ETC2002 Network Communicator 21
6. From the File menu, select Save to save your settings for
the ETC2002 session. When you next open a session and
the New Connection dialog appears, click Cancel, select
Open from the File menu, and then double-click on your
session file.
Opening a Terminal Session
Put the PROG-RUN key on the ETC2002 in the PROG position. The
ETC2002 Terminal program is now launched and will print a list of the
available commands as follows:
ETC2002 Ethernet Converter Ver. 21.X.X
SATEC/TCP Server, Modbus/TCP Server, DNP3.0/TCP Server.
Copyright (C) 2002, SATEC Ltd.
ETC Terminal commands
---------------------------------------------
h Displays this text
ver About ETC version
password Password setting
ip TCP/IP settings
port TCP service port number
b Change the terminal baud rate
COM[Port][Baud][Data] Serial port settings:
Port = 3/4/5
Baud = 1200/…/57600
Data = 7E/8N/8E
modem Modem connection parameters
XP eXpertPower client parameters
time [hh:mm:ss] Time
date [dd/mm/yy] Date
log Prints network log
stat Prints network statistics
stat ip
Prints current network IP
addresses
stat xp Prints XP client status
service Service Menu
datasrv Data server configuration
run dump Starts dumping the log to console
run net Starts the network
run server Starts the TCP server