SATEC ETC2002 User Manual
Page 38
Chapter 5 Setting Up the ETC2002
Configuring Dial-Up Connections
38
ETC2002 Network Communicator
,
Dial pause: the modem will pause for a specified time before
dialing the following digits.
W
Wait for dial tone: the modem will wait for a dial tone before
dialing the digits following "W".
@
Wait for silence: the modem will wait for at least 5 seconds of
silence before continuing with the next dial string parameter.
( )
Ignored: may be used to format the dial string.
-
Ignored: may be used to format the dial string.
<space> Ignored: may be used to format the dial string.
Example: 9W02, 5411000
Using PAS
To enter the Setup dialog, select the ETC2002 site from the list box on the
PAS toolbar, select Communications Setup from the Meter Setup menu, and
then click on the Dial-Up Networking Setup tab.
The following table lists available connection options.
Parameter Options Default
Description
Dial-in Connection Options
IP Address
192.168.10.203 The ETC2002 IP address on the
modem PPP network. Use it in your
Dial-Up networking applications for
connections to the ETC2002 TCP
server.
Network Subnet
Mask
255.255.255.0
The ETC2002 PPP network subnet
mask
Network Default
Gateway
192.168.10.1
The ETC2002 PPP network default
gateway
Idle Time Before
Hanging Up
1-9999 sec
60
The modem disconnects a call if idle
for more than the specified idle
time.
Rings before
Answer
1-99
8
The number of rings before the
modem answers an incoming call
from a remote modem.