SATEC ETC2002 - Manual (Page 31)

Chapter 4 Connecting to the ETC2002 Using PAS Software
ETC2002 Network Communicator 31
Uploading Setup from the ETC2002
To upload the setup from the ETC2002 to the site database, check the On-
line button on the PAS toolbar, select the device site from the list box on the
toolbar, and then select Upload Setups from the Meter Setup menu.
Authorization
If communications with your ETC2002 is secured, you are prompted for the
password when you send new setup data to the device.
Enter the password and click OK. If your authorization was successful, you
are not prompted for the password again until you close the dialog window.