Barco R9001769 - Manual (Page 34)

8-7
Random Access Adjustment Mode
5976069 BARCOREALITY 6400 14032000
0 2.5
3
Color Temperature
1 Push the cursor key é or ê to highlight 'Color Temperature'.
2 Press ENTER to select.
The color temperature selection menu will be displayed.
The next choices are possible :
- Projector white
- Broadcast 3200 K
- Film 5400 K
- Video 6500 K
- Computer 9300 K
- Custom balance.
Push the cursor key up or down to select a fixed color temperature
or custom balance.
Projector white will provide maximum projector light output.
The calibrated 'Broadcast', 'Film', 'Video' and 'Computer' presets will
provide optimum color tracking.
Custom balance allows the user to set his own preferred color
temperature.
To adjust Custom Balance, handle as follow :
1 Push the cursor key é or ê to highlight 'Custom Balance'.
2 Press ENTER to select.
3 Push the cursor key é or ê to adjust red and push the cursor
key ç or è to adjust blue (range 0 to 2.5) in comparison with
the green color (value 1).
COLOR TEMPERATURE
PROJECTOR WHITE
COMPUTER 9300K
VIDEO 6500K
FILM 5400K
BROADCAST 3200K
CUSTOM BALANCE
Select with ,
then <ENTER>
<EXIT> to return.
PICTURE TUNING
CTI [ON]
COLOR TEMPARATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
GAIN RED
Gamma
With the gamma correction adjustment, it is possible to accurately set
the gamma of the projector image.
To change the gamma value :
1 Push the cursor key é or ê to highlight 'Gamma'.
2 Press ENTER to select.
3 Change the gamma value by pushing the cursor key ç or è
until the desired value is reached.
4 Press EXIT to return to the Picture Tuning menu.
PICTURE TUNING
CTI [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
GAMMA = 2.2
Decoding EBU/IRE
Only for NTSC signals.
The possibility is offered to decode the NTSC video signals via the
default American IRE standard or via the European EBU standard.
Decoding a NTSC signal using the European EBU standard may result
in a greenish tint.
1 Push the cursor key é or ê to highlight 'Decoding'.
2 Press ENTER to toggle between EBU or IRE.
3 Press EXIT to return.
Select with or
then <ENTER>
<EXIT> to return.
PICTURE TUNING
CTI [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH
NOISE REDUCTION
INPUT BALANCE