Barco R9001769 - Manual (Page 39)

8-12
Random Access Adjustment Mode
5976069 BARCOREALITY 6400 14032000
Adjustment of the blanking on the top of the image
Select with or
then <ENTER>
<EXIT> to return.
Bottom blanking
Top blanking
Right blanking
Left blanking
Adjustment of the blanking on the bottom of the image
Correct by pushing the cursor key up or down
Adjustment of the blanking on the left side
Adjustment of the blanking on the right side
Correct by pushing the cursor key to the right or to the left
BLANKING
TOP
BOTTOM
LEFT
RIGHT
Select with or
then <ENTER>
<EXIT> to return.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPECT RATIO [5:4]
OPTIONS
BLANKING
TOP
BOTTOM
LEFT
RIGHT
RESET
Select with or
then <ENTER>
<EXIT> to return.
Blanking
Blanking adjustments affect only the edges of the projected image
and are used to frame the projected image on to the screen and to
hide or black out unwanted information (or noise). A '0' on the bar
scale indicates no blanking.
To adjust the blanking :
1 Push the cursor key é or ê to highlight 'Blanking'.
2 Press ENTER to display the blanking menu.
The following blanking corrections are possible :
- top blanking
- bottom blanking
- left blanking
- right blanking