Barco R9001769 - Manual (Page 51)

Service Mode
11-6 5976069 BARCOREALITY 6400 21082000
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
I2C DIAGNOSIS
D C A
DECODER 12H # # #
INPUT SELECT 16H # # #
AUDIO 18H # # #
MOTOR DRIVER 74H # # #
LAMP DRIVER 78H # # #
LCD DRIVER C0H # # #
LCD DRIVER C4H # # #
LCD DRIVER C8H # # #
LCD DRIVER CCH # # #
<EXIT> TO RETURN
SERVICE
BARCO LOGO
PANEL ADJUSTMENTS
UNIFORMITY
PRESET INPUT BALANCE
I2C DIAGNOSIS
MORE...
I2C diagnosis.
Gives an overview of the correct working of the I²C controlled IC's.
Highlight I2C diagnosis by pushing the cursor key up or down and
press ENTER to display the overview.
Preset Input Balance
Changing these settings may seriously affect the perform-
ance of the projector.
When Preset Input Balance is selected in the Service Mode selection
menu, the following warning will be displayed :
Preset Input Balance is reserved to qualified service personnel.
If you are not qualified, press EXIT to cancel the preset input balance.
SERVICE
BARCO LOGO
PANEL ADJUSTMENTS
UNIFORMITY
PRESET INPUT BALANCE
I2C DIAGNOSIS
MORE...
WARNING
PRESET INPUT BALANCE
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
SERVICE
BARCO LOGO
PANEL ADJUSTMENTS
UNIFORMITY
PRESET INPUT BALANCE
I2C DIAGNOSIS
MORE...
WARNING
PRESET INPUT BALANCE
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
Uniformity
Changing these settings may seriously affect the perform-
ance of the projector.
When Uniformity is selected in the Service Mode selection menu, the
following warning will be displayed :
Uniformity is reserved to qualified service personnel.
If you are not qualified, press EXIT to cancel the uniformity.