Barco R9001769 - Manual (Page 45)

10-5
Installation Mode
5976069 BARCOREALITY 6400 21082000
Select with or
then <ENTER>
<EXIT> to return.
Internal Patterns
IThe projector is equipped with different internal patterns which can
be used for measurment purposes.
To select an internal pattern, handle as follow :
1 Push the cursor key é or ê to highlight 'Internal Patterns'.
2 Press ENTER to select.
The internal pattern menu will be displayed.
3 Push the cursor key é or ê to highlight the Internal Patterns.
4 Press ENTER to display the select internal pattern.
The following patterns are available :
Outline
Hatch
Color Bars
Multiburst
Checker Board
Page Characters
Alpha-numeric characters
Character Sets
Switching Mode
When switching from one source to another, the time between the
switch off of the first source and the upcoming new source can be
filled up with a blank image or with a freeze of the last projected image.
To install the switching mode, follow the next procedure :
1 Push the cursor key é or ê to highlight 'Switching mode'.
2 Press ENTER to select.
The switching mode menu will be displayed.
3 Select 'Switching' and press ENTER to toggle between
[blanking] or [freeze].
[blanking] : by switching from one source to another the image will be
blanked out and the installed color in the item 'No Signal' will be
displayed.
[freeze] : by switching from one source to another the last projected
image will be frozen until the new source is displayed.
Select with or
then <ENTER>
<EXIT> to return.
INTERNAL PATTERNS
OUTLINE
HATCH
COLOR BARS
MULTIBURST
CHECKER BOARD
PAGE CHAR
ALPHA_NUMERIC CHAR
CHARACTER SETS
INSTALLATION
800 PERIPHERALS
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
SWITCHING MODE
more ...
Select with or
then <ENTER>
<EXIT> to return.SWITCHING MODE
SWITCHING : [BLANKING]
Select with or
then <ENTER>
<EXIT> to return.
INSTALLATION
800 PERIPHERALS
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
SWITCHING MODE
more ...