Barco R9001769 - Manual (Page 56)

C-1
Source Numbers 80 - 89 and 90 - 99
5976069 BARCOREALITY 6400 251099
C
SOURCE NUMBERS 81 - 86 AND 91 - 96
Projector without any 800 peripheral connected.
The source numbers 81 - 86 and 91 - 96 do not correspond to physical inputs. An additional adjustment file can be created for these source
numbers. This file can contain different settings. The relationship between sources 1 - 6 and 91 - 96 or between 1 - 6 and 81 - 86 is shown
in the diagram below.
source input 1
source number 1
source number 81
source number 91
file A
file A'
file A''
source input 2
source number 2
source number 82
source number 92
file B
file B'
file B''
source input 3
source number 3
source number 83
source number 93
file C
file C'
file C''
source input 6
source number 6
source number 86
source number 96
file F
file F'
file F''
Follow the steps below to create a second or a third file for sources 1 to 6 :
1. Select the source between 1 and 6.
2. Select the corresponding source number between 81 and 86 or 91 and 96 with the digit keys on the RCU.
3. Enter the adjustment mode and load a corresponding file. Edit this file if necessary.
4. Save the file and exit the adjustment mode.
Projector with a 800 peripheral connected.
Source numbers 91 - 99.
The source numbers 91 - 99 do not correspond to physical inputs. An additional adjustment file can be created for
these source numbers (source numbers of the 800 peripheral). This file can contain different settings. The
relationship between sources 1 - 9 of the 800 peripheral and 91 - 99 is shown in the diagram below.
○○
source input 1
source number 1
source number 91
file A
file A'
source input 2
source number 2
source number 92
file B
file B'
source input 3
source number 3
source number 93
file C
file C'
source input 9
source number 9
source number 99
file I
file I'
○○
Follow the same procedure as for a projector without a 800 peripheral connected.