Rockwell Automation 20P PowerFlex DC Drive - Frame B SCR Modules - Manual (Page 19)

PowerFlex® DC Drive - Frame B SCR Modules 19
Step 7: Install the Pulse
Transformer Board and
Switching Power Supply
Board Install the Pulse Transformer board and Switching Power Supply board in
reverse order of removal as detailed in Step 4:
Remove the Pulse
Transformer and Switching Power Supply Boards on page 5 .
Step 8: Replace the
Protective Covers, Power
Wiring and Documenting
the Change 1. Replace the protective covers in the reverse order of removal as detailed
in Step 3: Remove the Protective Covers on page 3 .
2. Replace the power wiring in reverse order of removal as detailed in Step
2: Remove the Power Wiring on page 3 .
3. Install DPI cable (if present).
4. Record the installation of the new SCR Modules and date of installation
on the Field Installed Option label on the side of the drive (as shown
below).
Related Documentation Allen-Bradley publications are available on the internet at
www.rockwellautomation.com/literature .
For . . . Read this document
Publication
Number
In depth information regarding the
operation of PowerFlex Digital DC drives User Manual - PowerFlex Digital DC Drives 20P-UM001…