Rockwell Automation 284D ArmorStart - Getting Started - Manual (Page 12)

12
Publication 284D-QS001D-EN-P - July 2006
Table 2 Power, Control, Safety Monitor, and Ground Terminal Designations
➊ Only available with the Safety Monitor option.
Operation of NEMA Type 4X
Disconnect Handle To Open Disconnect Handle
1. Rotate locking ring 45° until it stops.
2. To open, push the tab on the left-hand side and lift the access cover.
Note: The access door can not be closed when 140 (black handle) is in the
OFF position.
To Close Disconnect Handle for Lockout/Tag out
With disconnect handle in the ON position, rotate lockout/tag out ring
counterclockwise until the disconnect handle is in the OFF position.
Note: The disconnect hanlde is designed to be used with a 1/4 in.
lockout/tag out padlock.
Terminal Designations No. of Poles Description
SM1 ➊ 2 Safety Monitor Input
SM2 ➊ 2 Safety Monitor Input
A1 (+) 2 Control Power Input
A2 (-) 2 Control Power Common
PE 2 Ground
1/L1 2 Line Power Phase A
3/L3 2 Line Power Phase B
5/L5 2 Line Power Phase C