Rockwell Automation 284D ArmorStart - Getting Started - Manual (Page 3)

Publication 284D-QS001D-EN-P - July 2006
3
Installation The ArmorStart Distributed Motor Controller is convection cooled.
Operating temperature must be kept between -20…40
°
C (-4…104°F).
Dimensions Dimensions are shown in millimeters (inches). Dimensions are not intended
to be used for manufacturing purposes. All dimensions are subject to
change.
Figure 1 Dimensions for 1 Hp and below @ 230V AC, 2 Hp and below @ 460V AC,
and 2 Hp and below @ 575V AC, IP67/NEMA Type 4 with Conduit
Entrance