Vocabulary, Reference manuals – Rockwell Automation 198x Modular DeviceNet Starter Auxiliary I/O User Manual
Page 6

2 Preface
Publication 198-UM001B-EN-P September 2001
Vocabulary
Note the following references throughout this manual:
• Bulletin 198 with its options is referred to as the Modular-DSA I/O System.
• DeviceNet is referred to as Dnet or DNET.
• The Programmable Logic Controller is referred to as the Programmable controller,
PLC controller, or SLC controller.
• Earth Ground is referred to as GND.
• The National Electrical Code is referred to as NEC.
Reference Manuals
ATTENTION
!
Only personnel familiar with DeviceNet devices and associated
equipment should plan or implement the installation, start-up,
configuration, and subsequent maintenance of the Modular-DSA I/O
System. Failure to comply may result in personal injury and/or
equipment damage.
Product
Reference Manuals
For RSNetWorx for DeviceNet Software
Pub. No. 1787-6.5.3
(RSNetWorx Software Manual,)
For SLC 500 and 1747-SDN
Pub. No. 1747-5.8
(DeviceNet Scanner Module Installation Instructions)
For PLC-5 and 1771-SDN
Pub. No. 1771-5.14
(DeviceNet Scanner Module Installation Instructions)
For DeviceNet Cables and Components
Pub. No. DN-2.5
(DeviceNet Overview)