Rockwell Automation 440L GuardShield Type 2 Safety Light Curtain User Manual - Manual (Page 25)

GuardShield™ Type 2 Safety Light Curtain Installation Instructions
23
R
Original instructions
Document Control Number: SEN-0351-C-EN 1 / 2
EC Declaration of Conformity
The undersigned, representing the manufacturer and the authorised representative established within the Community
Rockwell Automation, Inc.
2 Executive Drive
Chelmsford, MA 01824
USA Rockwell Automation BV
Rivium 1e Straat, 23
2909 LE Capelle aan den IJssel
Netherlands
Herewith declare that the Products: GuardShield™ Type 2 Safety Light Curtains
Product identification (brand and
catalogue number/part number): Allen-Bradley / GuardShield 440L Series
(reference the attached list of catalogue numbers)
Product Safety Function: 440L Series Type 2 safety light curtains are active optoelectronic protection devices (AOPD’s)
with a resolution of 30mm. These safety light curtains are suitable for applications up to
Safety Category 2 and PLd (EN ISO 13849-1) and SIL2/SILCL2 (EN 61508/EN 62061).
are in conformity with the essential requirements of the following EC Directive(s) when installed in accordance with the installation instructions
contained in the product documentation:
2004/108/EC EMC Directive
2006/42/EC Machinery Directive
and that the standards and/or technical specifications referenced below have been applied:
EN 55022:1998 +A1:2000 +A2:2003 Information technology equipment – Radio disturbance characteristics – Limits and methods of
measurement
EN 61496-1:2004 + A1:2008 Safety of machinery – Electro-sensitive protective equipment – Part 1: General requirements and
tests
CLC/TS 61496-2:2006
IEC 61496-2:2006 Safety of machinery – Electro-sensitive protective equipment – Part 2: Particular requirements for
equipment using active opto-electronic protective devices (AOPDs)
EN 61508-1:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 1:
General requirements
EN 62061:2005 Safety of machinery – Functional safety of safety-related electrical, electronic and programmable
control systems
EN ISO 13849-1:2008 / AC:2009 Safety of machinery – Safety related parts of control systems – Part 1: General principles for design
The authorised representative is authorised to compile the Technical File.
Conformance of a type sample belonging to the above mentioned product family with the regulations from the EC Machinery Directive has been
certified by:
TÜV NORD CERT GmbH
Langemarckstr. 20,
D-45141 Essen, Germany
ID-No.: 0044 EC Type Examination Certificate No.
44 205 10 383326 001
Manufacturer: Authorised Representative in the Community:
Signature
Signature
Name: Daniel L. Nachtigall Name: Viktor Schiffer
Position: Technical Leader - Certification Engineering Position: Engineering Manager
Date: 14-Apr-2011 Date: 20-Apr-2011
Place: Milwaukee, WI, USA Place: Haan, Germany