Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit - Manual (Page 31)

PowerMonitor 1000 Unit 31
Rockwell Automation Publication 1408-IN001E-EN-P - September 2013
Setup Example
This example steps through setting the unit date to demonstrate use of the display and buttons to
navigate through the setup menu and make changes to parameters.
1. Navigate to the initial screen.
The screen shown is the top level screen. If it is not present, press <escape> until it
appears.
If you press <escape> once too often, the To Default Screen? message appears. Press
<escape> once more if this occurs.
2. Press <enter> and this screen appears.
PowerMonitor 1000 RS-485 STATUS
RX TX Mod Net
Power And
Energy Management
Solutions
PowerMonitor 1000
RS-485 STATUS
RX TX Mod Net
Display