Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit - Manual (Page 9)

PowerMonitor 1000 Unit 9
Rockwell Automation Publication 1408-IN001E-EN-P - September 2013
Remove
Follow these steps to remove the unit from a DIN rail.
1. Insert a small screwdriver into the exposed slot in the tab to remove the unit from the
DIN rail.
2. Pull enclosure forward and remove from the rail.
Product Dimensions
PowerMonitor 1000
EtherNet/IP
ACT LNK
STATIS RS-485 RS-485
+ - SHLD
RX TX Mod Net
70
(2.78)
140
(5.5)
90
(3.54)
All dimensions are mm (in.).
Panel mount depth 59 mm (2.4 in.).
DIN-rail mount depth 62 mm (2.44 in.).
Hole spacing tolerance: ±0.4 mm (0.016 in.).