Rockwell Automation 1203-SM1 SLC to SCANport Communication Module - Manual (Page 8)

P–2 Preface
Publication 1203–5.9 –– October 1996
Contents of this Manual
This manual contains the following information:
Chapter: Title: Contents:
Preface
Describes the purpose, background, and scope of this
manual.
1 Overview
Provides an overview of the SLC to SCANport
communications module.
2
Installing the SLC
to SCANport
Module Provides the procedures you need to install your SLC to
SCANport communications module and attach it to the
SCANport network.
3 Using Basic Mode
Provides information that you need to configure your
SLC to SCANport communications module for SLC
basic mode operation.
4
Using Enhanced
Mode
Provides information that you need to configure your
SLC to SCANport communications module for SLC
enhanced mode operation.
5 Troubleshooting
Provides information about the LED indications and
fault descriptions.
6 Specifications
Provides the environmental, electrical, and
communications specifications.
A
M0, M1, and G
Files Provides generic information about using the M0, M1,
and G files.
B
SCANport Message
Index Provides a listing of some of the most commonly used
SCANport message structures.