Rockwell Automation 1790D-XXXX DeviceNet Digital Base Terminal Block CompactBlock LDX I/O Series A - Manual (Page 11)

DeviceNet Digital Base Terminal Block CompactBlock LDX I/O 11
Publication 1790-IN006C-EN-P - May 2006
Mount your block on a panel or DIN rail.
Wire the Terminal Block
WARNING
If you connect or disconnect wiring while the field-side power is on, an
electrical arc can occur. This could cause an explosion in hazardous
location installations. Be sure that power is removed or the area is
nonhazardous before proceeding.
The longer expansion cable
(1790-15CMCBL) provides for
up to 7 cm (2.76 in.) of space
in between blocks.
44155
Vertical Mounting
Horizontal Mounting