Rockwell Automation 1790D-XXXX DeviceNet Digital Base Terminal Block CompactBlock LDX I/O Series A - Manual (Page 4)

4 DeviceNet Digital Base Terminal Block CompactBlock LDX I/O
Publication 1790-IN006C-EN-P - May 2006
Power Supply
ATTENTION
1790D-T0V16, 1790D-T0B16
To comply with the CE Low Voltage Directive (LVD), the DeviceNet network and
outputs must be powered from a source compliant with Safety Extra Low
Voltage (SELV) or Protected Extra Low Voltage (PELV).
To comply with UL restrictions, the DeviceNet network must be powered from
a source compliant with Class 2 or Limited Voltage/Current.
1790D-T8BV8V, 1790D-T8BV8B
To comply with the CE Low Voltage Directive (LVD), the DeviceNet network and
I/O must be powered from a source compliant with the Safety Extra Low
Voltage (SELV) or Protected Extra Low Voltage (PELV).
To comply with UL restrictions, the DeviceNet network must be powered from
a source compliant with Class 2 or Limited Voltage/Current.
1790D-T0W6
To comply with the CE Low Voltage Directive (LVD), the DeviceNet network and
relay coil power must be powered from a source compliant with Safety Extra
Low Voltage (SELV) or Protected Extra Low Voltage (PELV).
To comply with UL restrictions, the DeviceNet network must be powered from
a source compliant with Class 2 or Limited Voltage/Current.
1790D-T16BV0
To comply with the CE Low Voltage Directive (LVD), the DeviceNet network and
output devices must be powered from a source compliant with Safety Extra
Low Voltage (SELV) or Protected Extra Low Voltage (PELV).
To comply with UL restrictions, the DeviceNet network must be powered from
a source compliant with Class 2 or Limited Voltage/Current.
1790D-T0A6, 1790D-T8A0
To comply with the CE Low Voltage Directive (LVD), the DeviceNet network
must be powered from a source compliant with Safety Extra Low Voltage
(SELV) or Protected Extra Low Voltage (PELV).
To comply with UL restrictions, the DeviceNet network must be powered from
a source compliant with Class 2 or Limited Voltage/Current.