Rockwell Automation 1747-SCNR SLC ControlNet Scanner Module Installation Instructions - Manual (Page 5)

SLC ControlNet Scanner Module 5
Publication 1747-IN059C-EN-P - September 2001
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low
Voltage by applying the safety requirements of EN 61131-2
Equipment Requirements and Tests.
For specific information required by EN 61131-2, see the appropriate
sections in this publication as well as the following Allen-Bradley
publications:
•
Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
•
Automation Systems Catalog, publication B113
This equipment is classified as open equipment and must be
installed (mounted) in an enclosure as a means of providing safety
protection.
Related Publications
If you need a copy of these manuals, access the Automation
Bookstore website at http://www.theautomationbookstore.com or
the Manuals On line website at http://www.ab.com/manuals.
For: Refer to the: Publication:
software configuration
information ControlNet 1747-SCNR
Reference Manual
1747-RM623
1
planning and installation
information ControlNet Cable System
Planning and Installation Manual 1786-6.2.1
terminating ControlNet
coaxial cables information Terminating Your ControlNet
Coaxial Cables
CNET-DM001
1
1. The publication number listed includes only the base number. The Automation Bookstore and Manuals On line
will list the latest version of the publication. For example, 1747-RM623C-EN-P.