Rockwell Automation 1747-PT1, D1747NP002 Hand-Held Terminal - Manual (Page 37)

2 Chapter
2–1
The Menu Tree
This chapter guides you through the HHT display menu tree. It is intended
as an overview. For a more detailed introduction to ladder programming,
refer to The Getting Started Guide for HHT, catalog number 1747–NM009.
The abbreviated function and instruction mnemonic keys you encounter in
this manual and on the HHT displays are explained at the end of this chapter.
Before you begin using the HHT to develop a user program or communicate
online, you should be familiar with the following:
Progressing through Menu Displays
To progress through the HHT menu displays, press the desired function key.
When that display appears, press the next appropriate function key, and so
on.
1. For example, to clear the HHT memory, start from the Main menu.
SLC 500 PROGRAMMING SOFTWARE Rel. 2.03
1747 – PTA1E
Allen–Bradley Company Copyright 1990
All Rights Reserved
F1 F2 F3 F4 F5
PRESS A FUNCTION KEY
SELFTEST TERM PROGMAINT
OFL
UTILITY
2. Press [F3] , PROGMAINT. The following menu is displayed:
File Name: 101 Prog Name: 1492
File Name
Type Size(Instr)
0 System 217
1 Reserved 0
2 101 Ladder 465
CHG_NAM CRT_FIL EDT_FIL DEL_FIL MEM_MAP >
F1 F2 F3 F4 F5
OFL
Using the HHT Menu