Rockwell Automation 1792D-8BT8PE ArmorBlock MaXum 8 In/8 Out Module with Ground Lug - Manual (Page 9)

ArmorBlock MaXum 8 Input / 8 Output Module With Ground Lug 9
Publication 1792D-IN055A-EN-P - October 2004
I/O connectors for this module are shown below.
Output Power and DeviceNet Cables
Output power and DeviceNet cables are described in the installation
publications for the cable base assembly of your choice. Refer to the
following publications:
• 1792D-IN009 ArmorBlock MaXum Cable Base Installation
Instructions
• DN-6.7.2 DeviceNet Cable Planning and Installation Manual
WARNING
If you connect or disconnect wiring while the
field-side power is on, an electrical arc can occur.
This could cause an explosion in hazardous
location installations. Be sure that power is
removed or the area is nonhazardous before
proceeding.
I-4
I-5
I-6
I-7
O-4
O-5
I-2
I-3
O-2
O-3
O-6
O-7
Logic Status Net/Mod Status
I-0
I-1
O-0
O-1
Auxilary Power
41517
Input 0
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
Output 0
Output 1
Output 2
Output 3
Output 4
Output 5
Output 6
Output 7
Connector A
Connector B
Connector C
Connector D
Connector E
Connector F
Connector G
Connector H