Rockwell Automation 1771-P7 AC (120/220V) 16A Power Supply Installation Instructions - Manual (Page 10)

AC (120/220V) 16A Power Supply 10
Publication 1771ĆIN056B EN-P - December 2001
!
WARNING
If you connect or disconnect the power supply
cable with power applied an electrical arc can
occur. This could cause an explosion in hazardous
location installations. Be sure power is removed
or the area is nonhazardous before proceeding.
3. Connect the other end of the power cable to the D-shell connector
on the I/O chassis and tighten the connector screws until snug,
plus 1/4 turn.
1771ĆA1B, ĆA2B, ĆA3B1, ĆA4B I/O chassis 1771ĆA3B I/O chassis
1771-CP2
connector screws
1771-CP3
12623ĆI
connector screws
12624ĆI