Rockwell Automation 1771-P7 AC (120/220V) 16A Power Supply Installation Instructions - Manual (Page 4)

AC (120/220V) 16A Power Supply 4
Publication 1771ĆIN056B EN-P - December 2001
!
ATTENTION
The 1771-P7 is a stand-alone power supply. Do
not connect it in parallel with any other power
supply. Connecting it in parallel could result in
processor memory loss or injury due to
unexpected machine operation.
!
WARNING
When used in a Class I Division 2 hazardous
location, this equipment must be mounted in a
suitable enclosure with a proper wiring method
that complies with governing electrical codes.
!
ATTENTION
Preventing Electrostatic Discharge
This equipment is sensitive to electrostatic
discharge, which can cause internal damage and
affect normal operation. Follow these guidelines
when you handle this equipment:
•
Touch a grounded object to discharge potential
static.
•
Wear an approved grounding wriststrap.
•
Do not touch connectors or pins on component
boards.
•
Do not touch circuit components inside the
equipment.
•
If available, use a static–safe workstation.
•
When not in use, keep modules in appropriate
static–safe packaging.