Rockwell Automation 1771-P7 AC (120/220V) 16A Power Supply Installation Instructions - Manual (Page 7)

AC (120/220V) 16A Power Supply 7
Publication 1771ĆIN056B EN-P - December 2001
3. Slide the power supply onto the left side of the chassis:
1771ĆP7
left side I/O chassis
Slide power supply down.
Place keyhole slot over
large screw on I/O chassis.
Make sure mounting brackets
are behind the small screws.
13448
4. Tighten the small screws until snug, plus 1/4 turn (about 29
pound–inches), to secure the power supply to the I/O chassis.
1771ĆP7
left side I/O chassis
12629ĆI
small screws