Rockwell Automation 1769-IF4FXOF2F Compact Combination Fast Analog I/O Module - Manual (Page 15)

Compact Combination Fast Analog I/O Module 15
Publication 1769-IN081A-EN-P - February 2007
Wire Analog Outputs
Label the Terminals
A removable, write-on label is provided with the module. Remove the label from
the door, mark the identification of each terminal with permanent ink, and slide the
label back into the door. Your markings (ID tag) will be visible when the module
door is closed.
Remove the Finger-safe Terminal Block
When wiring field devices to the module, it is not necessary to remove the terminal
block. If you remove the terminal block, use the write-on label on the side of the
terminal block to identify the module slot location and type.
ATTENTION
Analog outputs may fluctuate for less than a second when power is applied
or removed. This characteristic is common to most analog outputs. While
the majority of loads will not recognize this short signal, take preventive
measures to ensure that connected equipment is not affected. Failure to
take these preventative measures may result in unexpected load reactions.
V in 0+
V/I in 0 -
I in 0+
V in 1+
V/I in 1-
I in 1+
V in 2+
V/I in 2-
I in 2+
ANLG Com
ANLG Com
V in 3+
I out 0+
V out 0+
I out 1 +
V out 1+
V/I in 3-
I in 3+
Voltage Load
Current Load
Earth Ground
Earth Ground
1769-IF4FXOF2F Terminal Block
SLOT # _____
MODULE TYPE ______