Rockwell Automation 1769-IF4FXOF2F Compact Combination Fast Analog I/O Module - Manual (Page 9)

Compact Combination Fast Analog I/O Module 9
Publication 1769-IN081A-EN-P - February 2007
Mount Expansion I/O
Minimum Spacing
Maintain spacing from enclosure walls, wireways, or adjacent equipment. Allow
50 mm (2 in.) of space on all sides for adequate ventilation, as shown.
Mount Module to Panel
Mount the module to a panel using two screws per module. Use M4 or #8 panhead
screws. Mounting screws are required on every module.
ATTENTION
During panel or DIN rail mounting of all devices, be sure that all debris, that is,
metal chips or wire strands, is kept from falling into the module. Debris that
falls into the module could cause damage when cycling power.
Controller
Compact I/O Compact I/O Compact I/O Compact I/O Compact I/O
End Cap
Top
Bottom
Side Side