Rockwell Automation 1790D-XXXX DeviceNet Digital Base D-Shell Module CompactBlock LDX I/O - Manual (Page 15)

DeviceNet Digital Base D-Shell Block CompactBlock LDX I/O 15
Publication 1790-IN007C-EN-P - May 2006
1 . Connect the DeviceNet wiring (drop line) to one of the
DeviceNet connectors as shown in the figure, noting that a
color-coded wiring diagram is printed next to the connector
on the left side of the base block.
2. Attach the connector to the base block once you have
properly wired the drop line to the connector.
3. Use the locking screws on the connector to fasten it to the
base block, if applicable.
Wiring Diagram for
1799-DNETCON
Wiring Diagram for
1799-DNC5MMS
Drain/Shield
Can_H White
Can_L Blue
V+ Red
V- Black
V- Black
Can_L Blue
Drain/Shield
Can_H White
V+ Red
Connector
Connector