Rockwell Automation 1790D-XXXX DeviceNet Digital Base D-Shell Module CompactBlock LDX I/O - Manual (Page 4)

4 DeviceNet Digital Base D-Shell Block CompactBlock LDX I/O
Publication 1790-IN007C-EN-P - May 2006
Power Supply
ATTENTION
1790D-0V16, 1790D-0B16
To comply with the CE Low Voltage Directive (LVD), the DeviceNet network and
outputs must be powered from a source compliant with Safety Extra Low
Voltage (SELV) or Protected Extra Low Voltage (PELV).
To comply with UL restrictions, the DeviceNet network and outputs must be
powered from a source compliant with Class 2 or Limited Voltage/Current.
1790D-8BV8V, 1790D-8BV8B
To comply with the CE Low Voltage Directive (LVD), the DeviceNet network and
I/O must be powered from a source compliant with Safety Extra Low Voltage
(SELV) or Protected Extra Low Voltage (PELV). To comply with UL restrictions,
the DeviceNet network and I/O must be powered from a source compliant with
Class 2 or Limited Voltage/Current.
1790D-0W6
To comply with the CE Low Voltage Directive (LVD), the DeviceNet network and
relay coil power must be powered from a source compliant with Safety Extra
Low Voltage (SELV) or Protected Extra Low Voltage (PELV). To comply with UL
restrictions, the DeviceNet network and relay coil must be powered from a
source compliant with Class 2 or Limited Voltage/Current.
1790D-16BV0
To comply with the CE Low Voltage Directive (LVD), the DeviceNet network and
output devices must be powered from a source compliant with Safety Extra
Low Voltage (SELV) or Protected Extra Low Voltage (PELV). To comply with UL
restrictions, the DeviceNet network and output devices must be powered from
a source compliant with Class 2 or Limited Voltage/Current.