Rockwell Automation 1768-CNBR CompactLogix ControlNet Communication Module Installation Instructions User Manual
Compactlogix controlnet interface module, Installation instructions, About this publication
Advertising
Publication
1768-IN006A-EN-P - September 2007
Installation Instructions
CompactLogix ControlNet Interface Module
Catalog Numbers 1768-CNB, 1768-CNBR
About This Publication
Use this document as a guide to install the CompactLogix ControlNet Bridge
Interface Module.
Topic
Page
North American Hazardous Location Approval
Prevent Electrostatic Discharge
Connect to a ControlNet Network
Interpreting the Status Indicators
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1768-IN006A-EN-P
- CompactLogix ControlNet Interface Module
- About This Publication
- Important User Information
- North American Hazardous Location Approval
- Environment and Enclosure
- Prevent Electrostatic Discharge
- Before You Begin
- Installing the Modules
- Mount Modules with Screws
- Install the DIN Rail
- Mount the Module on the DIN Rail
- Mount the Power Supply on the DIN Rail
- Connect the Module
- Set the Network Address Switches
- Connect to a ControlNet Network
- Connecting a Laptop Computer to the Network with a 1784-PCC Card
- Connecting a Desktop Computer to the Network with a 1786-CP Cable
- Connecting a Desktop Computer Directly to the ControlNet Network
- Confirm Installation
- Remove a Module
- Interpreting the Status Indicators
- ControlNet Network Channel-status Indicators
- Specifications
- Additional Resources
- Back cover