Rockwell Automation 1768-CNBR CompactLogix ControlNet Communication Module Installation Instructions - Manual (Page 5)

CompactLogix ControlNet Interface Module 5
Publication 1768-IN006A-EN-P - September 2007
Prevent Electrostatic Discharge
For additional information, refer to Industrial Automation Wiring and
Grounding Guidelines, publication 1770-4.1.
ATTENTION
This equipment is sensitive to electrostatic discharge, which can
cause internal damage and affect normal operation. Follow these
guidelines when you handle this equipment:
• Touch a grounded object to discharge potential static.
• Wear an approved grounding wriststrap.
• Do not touch connectors or pins on component boards.
• Do not touch circuit components inside the equipment.
• Use a static-safe workstation, if available.
• Store the equipment in appropriate static-safe packaging when
not in use.