Rockwell Automation 1785-l11B, -L20B, -L30B, -L40B, -L40L, -L60B, -L60L, -L80B Enhanced PLC-5 Programmable Controllers Installation Instructions - Manual (Page 14)

Publication 1785-IN062A-EN-P - May 2005
14 Enhanced PLC-5 Programmable Controllers
3. Depending on your controller catalog number, install the battery as
shown below:
4. Attach the battery cover.
5. Install the controller as shown above.
For more information, see the Enhanced and Ethernet PLC-5 Programmable
Controllers User Manual, publication number 1785-UM012.
Card Guides
Ejector Tab
Battery Connector is
Attached to a Wiring Harness
Battery Cover
Battery
Locking Bar
1785-L11 and -L20
Programmable Controllers
Battery Connector is mounted
inside the Battery Compartment
Battery
1785-L30, -L40, -L60 and -L80
Programmable Controllers
WARNING WARNING WARNING WARNING
When you connect or disconnect the battery, an electrical
arc can occur. This could cause an explosion in hazardous
location installations. Be sure that power is removed or the
area is nonhazardous before proceeding. For safety
information on the handling of lithium batteries, including
handling and disposal of leaking batteries, see Guidelines
for Handling Lithium Batteries, publication AG-5.4.