Rockwell Automation 1791R-XXXX CompactBlock Distributed I/O on Remote I/O Series D I.I. - Manual (Page 12)

12 CompactBlock Distributed I/O on Remote I/O Series D
Publication 1791R-IN002B-EN-P - August 2003
Panel Mounting
1. Place the module against the panel where you want to mount it.
2. Drill holes in the panel that are aligned with mounting holes on the
module.
3. Place screws through each of the 2 mounting holes and tighten until
the module is firmly in place.
DIN Rail Mounting
1. Hook top of slot over the DIN Rail.
2. Pull down on the locking lever while pressing the block against the
rail.
Status
Comm
0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
CompactBlock I/O
1791R-8V8P
8 INPUTS / 8 OUTPUTS - DC POWER
Allen-Bradley
Remote I/O
Base Module
141 mm
5.55 in
41 mm
1.6 in
41673
Locking Lever
90358