Rockwell Automation 1784-U2DHP USB-to-Data Highway Plus Cable Installation Instructions - Manual

Installation Instructions
USB-to-Data Highway Plus Cable
Catalog Number 1784-U2DHP
About the Cable
The 1784-U2DHP USB-to-Data Highway Plus Cable lets you connect a
computer to a Data Highway Plus (DH+) network via an unused USB port on
the computer. You can also use the cable to connect the computer to PLC-5
processors (except for Classic PLC-5 processors, such as PLC-5/10, PLC-5/12,
PLC-5/15, and PLC-5/25) or SLC 5/04 processors. Communication on the
DH+ link requires the RSLinx Classic software DF1 serial 1770-KF2/1785-KE
drive.
Topic Page
Important User Information 2
Environment and Enclosure 3
Install the Cable 5
Configure the DH+ Node Address 11
Consider the Traffic Analyzer Software 11
About Using Multiple Cables 12
Status Indicators 13
Specifications 15
Additional Resources 18