Rockwell Automation 1784-U2DHP USB-to-Data Highway Plus Cable Installation Instructions - Manual (Page 8)

8 USB-to-Data Highway Plus Cable
Rockwell Automation Publication 1784-IN045C-EN-P - May 2010
RSLinx Classic Software, Version 2.52 and Earlier
Do these steps to configure the cable device driver by using RSLinx Classic
software, version 2.52 and earlier.
1. Open RSLinx Classic software and then, from the Communication
menu, choose Configure Drivers.
2. From the Available Driver Types pull-down menu, choose RS-232 DF1
Devices.
3. Click Add New.
4. Enter a name for the driver you just added and click OK.
The Configure RS-232 DF1 Devices dialog box appears.