Rockwell Automation 1785-Lx0E,D178510.5 QUICK START ETHERNET PLC-9 - Manual (Page 10)

Publication 1785-10.5 - November 1998
1-4 Overview
Components You Need
Important: In this manual, we assume you are using a brand-new
Enhanced PLC-5 processor out of the box.
Compliance to
European Union Directives If this product has the CE mark it is approved for installation within
the European Union and EEA regions. It has been designed and tested
to meet the following directives.
EMC Directive
This product is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards,
in whole or in part, documented in a technical construction file:
• EN 50081-2EMC – Generic Emission Standard, Part 2 –
Industrial Environment
• EN 50082-2EMC – Generic Immunity Standard, Part 2 –
Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low
Voltage, by applying the safety requirements of EN 61131-2
Programmable Controllers, Part 2 – Equipment Requirements and
Tests.
For specific information required by EN 61131-2, see the appropriate
sections in this publication, as well as the following Allen-Bradley
publications:
• Industrial Automation Wiring and Grounding Guidelines For
Noise Immunity, publication 1770-4.1
• Guidelines for Handling Lithium Batteries, publication AG-5.4
• Automation Systems Catalog
Product name: Catalog number:
Hardware
Ethernet PLC-5 processor
with 2 keys 1785-L20E, -L40E, -L80E
Lithium Battery
(in a clear bag) 1770-XYC
I/O chassis 1771-A1B, -A2B, -A3B, -A3B1, -A4B
Power supply 1771-P4S, -P6S, -P4S1, -P6S1
Programming System
PC Check your programming software documentation for
system requirements, such as memory, etc.
PLC-5 programming
software Choose a programming software package that is
compatible with Ethernet PLC-5 processors.
communication module Ethernet interface and interconnect cable