Rockwell Automation 1769-OF4 Compact I/O Analog Output Module - Manual (Page 10)

10
Compact I/O Analog Output Module
Publication 1769-IN087A-EN-P - August 2009
5. Attach the modules to the panel by using the mounting screws.
6. Repeat steps 1 to 6 for any remaining modules.
Mount Module to a DIN Rail
The module can be mounted by using these DIN rails:
•
35 x 7.5 mm (EN 50 022 - 35 x 7.5)
•
35 x 15 mm (EN 50 022 - 35 x 15)
To mount the module on a DIN rail, follow these steps.
1. Close the DIN rail latches.
2. Press the DIN-rail mounting area of the module against the DIN rail.
The latches will momentarily open and lock into place.
Replacement Parts
The 1769-OF4 module has the following replacement parts:
•
Terminal block, catalog no. 1769-RTBN10 (1 per kit)
•
Door, catalog no. 1769-RD (2 per kit)
Field Wiring Connections
This section includes information on the following topics:
•
Module grounding
•
System wiring guidelines
•
Module wiring
•
Analog outputs wiring
•
Terminal labeling
•
Finger-safe terminal block wiring and removal
•
Wire size and terminal screw torque
•
Module configuration
TIP
If mounting more modules, mount only the last one of this group and put the
others aside. This reduces the remounting time during drilling and tapping of
the next group.