Rockwell Automation 1769-ASCII Compact I/O ASCII Module - Manual (Page 99)

Rockwell Automation Publication 1769-UM012B-EN-P - January 2014 99
Error Codes Appendix C
This table indicates the error codes that are associated with Channel 1.
Table 13 - Channel 1 Module Configuration Errors
Value
(Hex) Meaning Description
480 Invalid serial port framing The serial port framing specified is invalid.
481 Invalid serial port speed The serial port speed specified is invalid.
482 Invalid max number of receive characters The maximum number of receive characters specified
for channel 1 is too large.
483 Invalid receive record mode The receive record mode specified is invalid.
484 Invalid receive start delimiter The receive start delimiter specified is invalid.
485 Invalid receive record end mode The receive record end mode specified is invalid.
486 Invalid receive record end delimiter The receive record end delimiter specified is invalid.
487 Invalid pad character The pad character specified is invalid.
488 Invalid receive swap mode The receive swap mode specified is invalid.
489 Invalid master handshake mode The master handshake mode specified is invalid.
48A Invalid message timeout The timeout delay specified is invalid.
48B Invalid max number of transmit characters The transmit characters specified are invalid.
48C Invalid transmit record end mode The transmit record end mode specified is invalid.
48D Invalid transmit end delimiter The transmit end delimiter specified is invalid.
48E Invalid transmit swap mode The transmit swap mode specified is invalid.