Environment and enclosure, About t-taps and y-taps, Environment and enclosure about t-taps and y-taps – Rockwell Automation 1786-TPYS ControlNet Coax Taps Installation Instructions User Manual
Page 3
ControlNet Coax Taps 3
Rockwell Automation Publication 1786-IN007C-EN-P - October 2010
Environment and Enclosure
About T-taps and Y-taps
The ControlNet taps are available in two body types to accommodate the
connections that you need to make for your installation.
For examples of how these two tap bodies can be connected, refer to
on
ATTENTION: This equipment is intended for use in a Pollution
Degree 2 industrial environment, in overvoltage Category II
applications (as defined in IEC publication 60664-1), at altitudes up
to 2000 m (1.24 mi) without derating.
Besides this publication, see:
•
Industrial Automation Wiring and Grounding Guidelines, Rockwell
Automation publication
•
NEMA Standard 250 and IEC 60529, as applicable, for
explanations of the degrees of protection provided by different
types of enclosures.
T-tap
Y-tap